ISOLgate

You need to upgrade your Flash Player

Using the ICAM Model

The ICAM methodology provides the following logic towards incident and accident causation and supports the notion that most incidents and accidents are caused rarely by a single act or condition, but rather by a number of factors working together.

There are a number of ways ISOLgate presents this ICAM methodology to allowing comprehensive risk management information in an easy-to-digest fashion.


Simple 3-click search

The process generally follows just four simple steps (or just three clicks).

4 step process

1. Select the ICAM Category

2. Select the relevant section

3. Select the root cause

4. View the results

Printed: 25 November, 2017.

Important Disclaimer

By printing material on this website including all information, text, recommendations, ISOLgate graphs, ISOLgate Checklists, graphics and images (the "material") you have agreed to the ISOLgate Disclaimer. The material may not be applicable for the specific situation at your site and are provided as guidance material only and must be verified using a site specific risk assessment. UQ/MIRMgate does not accept any responsibility for the effectiveness or validity of the recommendations or your reliance on them. The material may not be distributed to other parties without the written permission of The University of Queensland.


©2017 ISOLgate